Cobra DT (Detector Tube Sample System)

Cobra DT (Detector Tube Sample System)

Cobra DT Sampling Solution:

Cobra DT front

Download PDF
The Cobra DT closed loop sampling system is specifically designed to perform a detector tube measurement in the safest, quickest and most efficient way possible. The key challenges in securing an accurate representative sample are addressed while making the process itself simpler for the operator. Our unique Teflon detector tube makes it easy to insert tubes, while disconnection is kept quick and simple for easy us. The system is ideally suited to use in the petrochemical, and natural and specialty gas industries.

The Cobra DT sampling system is designed with safety in mind, with a high-pressure regulator providing operators with a means to lower pressure to a safe level before inserting the detector tube. And the availability of either 300cc or 500cc collection cylinders means that sample volumes are always sufficient to offer an accurate representative sample. The Cobra DT can be ordered with just the detector tube or with a collection cylinder included.

Key features include:

• Provides a safe sampling method for performing a detector tube measurement
• Unique Teflon detector tube insert allows for easy insertion while protecting operator
• High-pressure regulator so pressure can be reduced to safe range prior to detector tube insertion
• Large volume chamber provides ample space when drawing the sample

Designed for the following applications:

• Gas measured with Detector Tube (Reformer Unit)

Ideal for use in the following industries:

• Refinery
• Chemical
• Petrochemical
• Specialty
• Natural Gas

Available system options include:

Type: Detector Tube Only or With Collection Cylinder
Cylinder Size: None (std)/300cc/500cc
O-Ring Material: Viton/Kalrez (std)/Other
Compression Fitting: Standard/Swagelok/Parker (1/2”) (Vent Connection 1/4”)
Quick Disconnect: Swagelok/Parker
Vent Type: to Flare/Emission Filter (with/without filter)/Steel Emission Filter (with/without Indicator)
Process Temperature: Standard (<140F)/Cooler Required (>140F)
Process Pressure: 0-100psi/0-200psi/0-300psi/0-400psi/other
Miscellaneous: Other Material to Stainless Steel; Pipe Stand; Dual Pipe Stand; Process Isolation Valve (inlet/return); Mounted Enclosure; Sample Pump; No Process Return

Cobra DT Full Details
password-protected-icon stylish-glossy-buttons

Print Friendly

Cobra Sampling, a part of Sentry Equipment © 2017 all rights reserved.